Aluminium Quick Release D-Ring 17mm Red

Aluminium Quick Release D-Ring 17mm Red
exc VAT £3.49 inc VAT £4.19
Part Number: lqrclip17r


Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. The 17mm length is ideal for 3-5mm panel thickness.

Additional Information 

Part No. lqrclip17r
Colour Red
Product Type Bodywork / Fairing
Material Aluminium
Bar Code 5053573220875
Country of Manufacture United Kingdom
Brand Name Pro-Bolt
Manufacturer to Fit Pro-Bolt Generic
Head Style D-Ring
Length 17mm
Head Diameter 12mm
Head Height 4.5mm
Pack Quantity 1

Material Information 


Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, gunmetal grey, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

New to our range is a Race Spec Drilled Flanged Hex Head Bolt with a Potassium Dichromate finish, which is excellent for Marine and Mining applications.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg


2 Review(s)

  1. Douglas -
    amazing eye candy!

    I get compliments all day long from this add on. Makes oil changes a breeze. No screw driver jumping off the head and scratching my chameleon paint job that i have. great investment and affordable! I added the rubber washers between the fairing and front headbolt so the wire would not scratch the paint. I have an aprilia rsv mille 2003 the countersunk fairing hole is slightly smaller than the wire, so the washer raises the head so the wire wont touch the fairing! just a little tip!

  2. Douglas -
    Excellent choice

    Beautiful compliment to my aprilia. Thanks for making these available. Installation hint: Use a thin napkin or paper towel between allen wrench and bolt when installing to prevent any scratching of anodisation! speaking from experience of coarse.

Write a Review 

You are reviewing

Aluminium Quick Release D-Ring 17mm Red

Only registered users can write reviews. Please, log in or register


Also Available In