Stainless Steel Disc Bolt Honda Rear

Stainless Steel Disc Bolt Honda Rear
exc VAT £3.56 inc VAT £4.27
You could receive 150 Pro-Bolt Points for writing a review and/or rating this product.
exc VAT £3.56 inc VAT £4.27


Stainless Steel Highly Polished Honda Disc Bolt - Allen Key Head M8 thread (1.25pitch) x 20mm length. Fits most models of Honda rear discs. Not only strong but also offers great corrosion resistance. Please note this is a shouldered bolt please see below for silhouette. Priced individually and listed in model specific bike sections where fitment has been established.

Additional Information

Material Stainless
Product Type Brake / Caliper
Weight in Gms 12.3200
Bar Code 5053573764812
Country of Manufacture United Kingdom
Allen Key Size 6mm
Head Diameter 16mm
Head Style Special - Allen Key
Head Height 3mm
Thread Diameter 8mm
Thread Pitch 1.25mm
Thread Length 18mm
Length 24mm
Shank Length 6mm
Pack Quantity 1

Material Information 

Stainless Steel

Manufactured from A316 stainless steel. A316 stainless steel has a minimum chromium content of 16.5% and contains elements of carbon, molybdenum, silicon, phosphorus, sulphur, nickel, manganese and iron, all of which add properties of formability, strength, weldability and enhanced corrosion resistance. All of the fasteners are highly polished to a mirror-like finish.

  • Density 8030kg/m3 (501lb/ft3)
  • Young's Modulus 193GPa (28 x 106psi)
  • Yield Strength 260MPa (37.7 x 103)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 260MPa (37.7 x 103 psi)
  • Shear Modulus78GPa (11.3 x 106 psi)
  • Ductility 40% elongation at break +
  • Minimum value allowed by ASTMA240
  • Poisson's Ratio0.27
  • Hardness 95 Rockwell B+
  • Maximum value allowed by ASTMA240
  • Strength-to-Weight Ratio 32.4 kNm/kg
  • Stiffness-to-Weight Ratio 24.0 Mnm/kg

Black & Gold Stainless Steel: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.

Product Fitment 

  • Motorcycle Honda CB125 All Years
  • Motorcycle Honda CB1300 03-08
  • Motorcycle Honda CB500 Unfaired 96-03
  • Motorcycle Honda CB600 Hornet SFW-SFX 98-99
  • Motorcycle Honda CB900 Hornet 01-07
  • Motorcycle Honda CBF1000 06-09
  • Motorcycle Honda CBF1000 ABS 09-10
  • Motorcycle Honda CBF600S 08-09
  • Motorcycle Honda CBR1000RR Fireblade 04-05
  • Motorcycle Honda CBR1000RR Fireblade 06-07
  • Motorcycle Honda CBR1000RR Fireblade 08-11
  • Motorcycle Honda CBR1000RR Fireblade 12-16
  • Motorcycle Honda CBR1100XX Blackbird 01-05
  • Motorcycle Honda CBR1100XX Blackbird 97-00
  • Motorcycle Honda CBR400RR NC23 Tri Arm 88-89
  • Motorcycle Honda CBR400RR NC29 Gull Arm 90-94
  • Motorcycle Honda CBR600F1-F5 00-04
  • Motorcycle Honda CBR600FS1-FS2 01-02
  • Motorcycle Honda CBR600FS-FW 95-98
  • Motorcycle Honda CBR600FX-FY 99-00
  • Motorcycle Honda CBR600RR 03-04
  • Motorcycle Honda CBR600RR 07-08
  • Motorcycle Honda CBR600RR 05-06
  • Motorcycle Honda CBR900RRN-RRS Fireblade 92-95
  • Motorcycle Honda CBR900RRT-RRV Fireblade 96-97
  • Motorcycle Honda CBR900RRW-RRX Fireblade 98-99
  • Motorcycle Honda CBR929RRY-RR1 Fireblade 00-01
  • Motorcycle Honda CBR954RR2-RR3 Fireblade 02-03
  • Motorcycle Honda NC700 12-13
  • Motorcycle Honda VTR1000 F Firestorm 97-05
  • Motorcycle Honda VTR1000 SP1 - RC51 00-01
  • Motorcycle Honda VTR1000 SP2 - RC51 02-05
  • Motorcycle Honda XL1000V V4-V9 Varadero 01-10
  • Motorcycle Honda XL700 VA Transalp 08-12
  • Motorcycle Honda CB600 Hornet F7-FAE 07-13
  • Motorcycle Honda CB600 Hornet FY-F6 98-06
  • Motorcycle Honda CBR600RR 09-12

Write a Review 

You are reviewing

Stainless Steel Disc Bolt Honda Rear

Only registered users can write reviews. Please, log in or register


Also Available In