Titanium Brake Caliper Pad Pin Nissin

Previous
Next
Titanium Brake Caliper Pad Pin Nissin
exc VAT £6.24 inc VAT £7.49
Part Number: MTIPINBP001
1 thing 0 5 5
You could receive 150 Pro-Bolt Points for writing a review and/or rating this product.
exc VAT £6.24 inc VAT £7.49
 

Description 

Titanium Caliper Pad Retaining Pins. Machined from grade 5 Titanium for Nissin calipers. These pins are lightweight and highly corrosion resistant. Listed in model specific bike sections where fitment has been established or you can download the attached PDF which details a silhouette. Please note our Titanium anodised range is not identical to our Aluminium range.

Additional Information

Part No. MTIPINBP001
Material Titanium Grade 5
Product Type Brake / Caliper
Weight in Gms 9.1000
Bar Code 5053573511010
Country of Manufacture United Kingdom
Allen Key Size 5mm
Length 64mm
Shank Length 52mm
Shank Diameter 6mm
Thread Length 10mm
Pack Quantity 1

Product Attachments

View FilePad Pin Information    Size: (1.09 MB)

Material Information 

Titanium

Made from aircraft grade titanium 6AL-4V (grade 5), the outstanding benefits are that we roll the threads to produce greater fatigue strength and reduce galling. These bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. We offer Race Spec drilled Flanged Hex Head Bolts, Flanged Hex Head, Tapered Socket Cap, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 12mm.

  • Density4420kg/m3 (276lb/ft3)
  • Young's Modulus 110GPa (16 x 106 psi)
  • Yield Strength 828MPa (120 x 103 psi)
  • Ultimate Tensile Strength 1030MPa (149 x 103 psi)
  • Compressive Strength 960MPa (139 x 103 psi)
  • Shear Modulus43GPa (6.24 x 106 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.34
  • Hardness 36 Rockwell C
  • Strength-to-Weight Ratio 187 kNm/kg
  • Stiffness-to-Weight Ratio 24.9 Mnm/kg

Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.

Reviews 

1 Review(s)

  1. neil -
    love it...

    I needed a new caliper Pad Pin as the OEM pin was dented by the brake pad's on a 5yr old bike but I was hesitant on the Length and diameter of the pro-bolt pin.After some thought I placed the order I measured the original as 65mm (overall length) but the new titanium was advertised as 52mm but upon installation the two pins were near enough the same in length.i fitted this to a Yamaha FZ1 Fazer 2011 rear brake.I got the titanium over the Stainless steel for weather purposes i.e: salt,rain it looks good on the caliper.

You will receive 150 Pro-Bolt Points upon approval of this review and/or rating.

Write a Review 

You are reviewing

Titanium Brake Caliper Pad Pin Nissin

Only registered users can write reviews. Please, log in or register