Titanium Countersunk Bolt M4 x (0.7mm) x 15mm

Titanium Countersunk Bolt M4 x (0.7mm) x 15mm
exc VAT £2.92 inc VAT £3.50
Part Number: MTICS415
exc VAT £2.92 inc VAT £3.50


Titanium Countersunk Bolt

This is the only style of bolt where the head is included in the length measurement, as it sits below the surface, the head contributes to the overall length.

Made from 6AL-4V (Grade 5) Titanium and machined with rolled threads, this bolt is not only strong and lightweight but also offers great corrosion resistance.

Sold here individually.

Black Titanium

The beautiful, long lasting black finish results from an application of Diamond Like Coating (DLC) this gives supreme hardness and corrosion resistance provided by a nano composite coating. This coating increases the fastener lifetime and helps to prevent galling.

DLC coatings increase the component lifetime dramatically. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced.

Also available in Blue, Gold and Purple Haze anodised Titanium. Please note that our coloured Titanium is not identical to our Aluminium range.

Unsure what size you need? Why not order one of our progauges and double-check? Take a look here

Additional Information

Part No. MTICS415
Product Type Bolt
Material Titanium Grade 5
Weight in Gms 0.8100
Bar Code 5053573503473
Country of Manufacture United Kingdom
Thread Diameter 4mm
Head Style Countersunk
Head Diameter 7.8mm
Head Height 2.5mm
Allen Key Size 2.5mm
Thread Pitch 0.70mm
Length 15mm
Thread Length 13mm
Pack Quantity 1

Material Information 


Made from aircraft grade titanium 6AL-4V (grade 5), the outstanding benefits are that we roll the threads to produce greater fatigue strength and reduce galling. These bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. We offer Race Spec drilled Flanged Hex Head Bolts, Flanged Hex Head, Tapered Socket Cap, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 12mm.

  • Density4420kg/m3 (276lb/ft3)
  • Young's Modulus 110GPa (16 x 106 psi)
  • Yield Strength 828MPa (120 x 103 psi)
  • Ultimate Tensile Strength 1030MPa (149 x 103 psi)
  • Compressive Strength 960MPa (139 x 103 psi)
  • Shear Modulus43GPa (6.24 x 106 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.34
  • Hardness 36 Rockwell C
  • Strength-to-Weight Ratio 187 kNm/kg
  • Stiffness-to-Weight Ratio 24.9 Mnm/kg

Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.

Write a Review 

You are reviewing

Titanium Countersunk Bolt M4 x (0.7mm) x 15mm

Only registered users can write reviews. Please, log in or register