Titanium Sprocket Nut M8 x (1.25mm) Drilled for Lockwire

Titanium Sprocket Nut M8 x (1.25mm) Drilled for Lockwire
exc VAT £9.45 inc VAT £11.34
Part Number: MTISPN8D
1 thing 0 5 5
exc VAT £9.45 inc VAT £11.34


Titanium Sprocket Nut. M8 x 1.25mm Drilled for Lockwiring 12mm socket size. Required Thread & Pitch for some earlier models of Honda, Triumph and many Off Road. Instant transformation to the back end of your bike. Made from 6AL-4V (Grade 5) titanium. These are stronger, lighter and are highly corrosion resistant. Priced individually. Please note the colour finish on titanium is not identical to our aluminium range.

Additional Information

Material Titanium Grade 5
Product Type Nut
Weight in Gms 3.3600
Bar Code 5053573515001
Country of Manufacture United Kingdom
Thread Diameter 8mm
Thread Pitch 1.25mm
Outside Diameter 16mm
Height 8.4mm
Socket Size 12mm
Pack Quantity 1

Material Information 


Made from aircraft grade titanium 6AL-4V (grade 5), the outstanding benefits are that we roll the threads to produce greater fatigue strength and reduce galling. These bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. We offer Race Spec drilled Flanged Hex Head Bolts, Flanged Hex Head, Tapered Socket Cap, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 12mm.

  • Density4420kg/m3 (276lb/ft3)
  • Young's Modulus 110GPa (16 x 106 psi)
  • Yield Strength 828MPa (120 x 103 psi)
  • Ultimate Tensile Strength 1030MPa (149 x 103 psi)
  • Compressive Strength 960MPa (139 x 103 psi)
  • Shear Modulus43GPa (6.24 x 106 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.34
  • Hardness 36 Rockwell C
  • Strength-to-Weight Ratio 187 kNm/kg
  • Stiffness-to-Weight Ratio 24.9 Mnm/kg

Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.


1 Review(s)

  1. giwrgos -
    yamaha fz1 2006

    i take this nuts for rear beringer pump

Write a Review 

You are reviewing

Titanium Sprocket Nut M8 x (1.25mm) Drilled for Lockwire

Only registered users can write reviews. Please, log in or register